Asmodus Voluna RDTA is the first rebuildable tank by asMODus and boy are we excited for this one. The Voluna features sleek aesthetics and provides an efficient design which provides both tremendous flavor and vapor production.
The build deck of the Voluna presents itself in a simple two post style coupled with enlarged building space allowing for easy building as well as capabilities of housing complex and intricate styled builds. The chimney was crafted to condense the vapor being produced which provides a richer, more intense vape and the positioning of the wicking holes are specifically designed to prevent leaks and flooding.
Airflow on the asMODus Voluna is provided by cyclops style adjustable airflow inlets located at the base on the tank. The Voluna is topped with a wide bore Delrin drip tip to dissipate any transfer of heat to your mouth.
The Minikin has come back bigger and better!
With these new innovative features, vaping just got a whole lot pleasurable.
We’re all very much familiar with the previous MinikinBoost, so how does the Minkin Reborn compare?
The Minikin Reborn use the Asmodus GX-168-HT chip. Its capable of 168 watts and can fire as low as .1ohms and as high as 2.5 ohms- while in the TC mode it is capable of 120 watts. It’s the same chip the Minikin V2 uses but it is the updated version. This chipset also contains the Curve Mode which became quite popular over the Minikin evolution. This mode gives you the ability to establish your own wattage curve in the intervals you choose.
Aside from these amazing new internal features, The Minikin Reborn now has the concave button allowing the fire button to be more smooth, more responsive, and accessible; and we can’t leave out the bigger and better touch screen on the Minikin Reborn. Double the size of the previous Minkin Boost model as well as the highly demanded touch screen. It’s easy to use, perfect for both intermediates and beginners. You can never go wrong with ASMODUS products, a company you can trust.
Looking for an entire set up? The Minkin Boost goes hand in hand with the new Crown III tank that had launched earlier this year. If you’re looking outstanding flavour, vapor production, long battery life, smooth hit, and much more, definitely check these guys out. The Crown III by UWELL are also available in a multitude of different colour styles so you can get creative with the image of your first, second, or even third set up! Don’t forget to grab an external battery charger if you haven’t already got one. It is always recommended to charge your batteries through an external battery charger for maximum proficiency!
Minikin Reborn Features:
Powered by the GX-168-HT chip which boosts battery life
Accommodates 2x 18650 sized batteries (not included)
Magnetic battery door
Enlarged OLED display
Maximum power output: 168.0 watts
Can be charged via an included micro USB
2 Safety Lock Modes
Lock Touch -Screen
Lock Fire Button
Resistances range: 0.1 – 2.5 Ω
Temperature Control mode: TC-Ni200/TC-SS316/TC-SS317/TI
1x Asmodus Minikin Reborn
1x Micro USB Cable
The Uwell Crown V3 Mini Tank is the mini version of the Uwell Crown V3 Tank. Sitting on a 22.6mm diameter base, the Crown V3 Mini is designed with an improved top-fill system with anti-leaking threading and holds 2ml of e-liquid or 4.5ml with the included extended glass. The Crown V3 Mini Tank utilizes the Crown V3 Coils with the recommended wattage for the 0.4ohm coil being 55W-65W, and the SS316 0.25ohm coil at 80W-90W.
With all new redesigned internals, and a fresh sleek look, the HexOhm v3.0 30A Box Mod by Craving Vapor has been upgraded from 3D printed materials to injection molded ultem which houses the solid brass spring-loaded battery contacts and hidden magnets in the door. The anodized Hexohm is powered by dual 18650 batteries, has its own proprietary board that is rated for up to 30 amps, and is capable of 180W. Some additional features added include: low voltage cutoff for battery protection, a 10 second cutoff timer, and a master on/off switch.
Lost Vape introduces the Paranormal DNA75C Box Mod. The Paranormal DNA75C is powered by dual 18650 batteries and is integrated with Evolv DNA75C chipset. Designed with a colorful 0.96" OLED display, the Paranormal features an accented leather door, carbon fiber inlay, interchangeable rosewood inlay, and turtle shell decoration ring. With the Evolv chipset, the Paranormal maintains an 85% efficiency rating with a maximum output of 75W with full temperature control support. It also allows users to customize their screen display with its theme designer software and is firmware upgradeable.
A collaboration between Wotofo and Suck My Mod introduces the Serpent SMM RTA. The Serpent SMM is designed with a redirected bottom airflow system, two post single coil build deck, threaded top-fill, and 4ml tank capacity. Its airflow system brings air in from a dual adjustable bottom airflow ring and redirects the air up into the posts of the build deck where it exits parallel with the coil. The Serpent SMM features a two post design with two slotted terminals per post.
A collaboration between Wotofo and Suck My Mod introduces the Serpent SMM RTA. The Serpent SMM is designed with a redirected bottom airflow system, two post single coil build deck, threaded top-fill, and 4ml tank capacity. Its airflow system brings air in from a dual adjustable bottom airflow ring and redirects the air up into the posts of the build deck where it exits parallel with the coil. The Serpent SMM features a two post design with two slotted terminals per post. Specifications: 24mm diameter Tank capacity: 4ml Thread top-fill design Single coil design with four slotted terminals Airslots built into post Dual 4mm diameter wicking ports PEEK insulator Dual adjustable bottom airslot Tapered 12mm bore ultem drip tip 510 drip tip compatible Gold-plated 510 contact Includes: 1 x Wotofo Serpent SMM RTA 2 x Replacement glass 1 x Pack of Japanese cotton 1 x Prebuilt clapton coils 1 x Spare parts pack
A delightful blend of blueberry, raspberry, dragon fruit, with hints of other summer fruits make this an exceptional blend that will spur your imagination to dream of medieval quests of adventure and slaying dragons.
Do you dare to be the Dragon Slayer?
The Dagger box mod is an innovative product geared toward new and veteran vapers. Traditional temperature control devices make the user responsible for setting the temperature. The Dagger ensures the ultimate vaping experience with our unique feature Auto Control Mode. The highly advanced PCB within the unit detects the boiling point of each e-liquid and delivers the optimal temperature every time.
Boasting a feature rich design The Dagger box mod delivers a truly incredible experience all around the board. This unit not only offers durable construction, but is lightweight as well. The box mod offers an ergonomic button layout all while still having an aesthetically pleasing design.
5-80 Watts Power Mode Temperature Control
Nickel, Titanium, 316 Stainless Celsius 100C-315C
Fahrenheit 200F-600F 18650 Battery (not included)
Spring loaded 510 Connector RoHS Compliant
Micro USB 0 5A Charging
CUSTOMIZE YOUR DAGGER WITH PLATES