REGULATED MODS
ASMODUS MINIKIN REBORN 168W BOX MOD
$99.99
The Minikin has come back bigger and better!
With these new innovative features, vaping just got a whole lot pleasurable.
We’re all very much familiar with the previous MinikinBoost, so how does the Minkin Reborn compare?
The Minikin Reborn use the Asmodus GX-168-HT chip. Its capable of 168 watts and can fire as low as .1ohms and as high as 2.5 ohms- while in the TC mode it is capable of 120 watts. It’s the same chip the Minikin V2 uses but it is the updated version. This chipset also contains the Curve Mode which became quite popular over the Minikin evolution. This mode gives you the ability to establish your own wattage curve in the intervals you choose.
Aside from these amazing new internal features, The Minikin Reborn now has the concave button allowing the fire button to be more smooth, more responsive, and accessible; and we can’t leave out the bigger and better touch screen on the Minikin Reborn. Double the size of the previous Minkin Boost model as well as the highly demanded touch screen. It’s easy to use, perfect for both intermediates and beginners. You can never go wrong with ASMODUS products, a company you can trust.
Looking for an entire set up? The Minkin Boost goes hand in hand with the new Crown III tank that had launched earlier this year. If you’re looking outstanding flavour, vapor production, long battery life, smooth hit, and much more, definitely check these guys out. The Crown III by UWELL are also available in a multitude of different colour styles so you can get creative with the image of your first, second, or even third set up! Don’t forget to grab an external battery charger if you haven’t already got one. It is always recommended to charge your batteries through an external battery charger for maximum proficiency!
Minikin Reborn Features:
Powered by the GX-168-HT chip which boosts battery life
Accommodates 2x 18650 sized batteries (not included)
Magnetic battery door
Enlarged OLED display
Maximum power output: 168.0 watts
Can be charged via an included micro USB
2 Safety Lock Modes
Lock Touch -Screen
Lock Fire Button
Resistances range: 0.1 – 2.5 Ω
Temperature Control mode: TC-Ni200/TC-SS316/TC-SS317/TI
Includes:
1x Asmodus Minikin Reborn
1x Micro USB Cable
Warranty Card
User Manual
HexOhm v3.0 30 Amp Anodized by Craving Vapor
$229.99
With all new redesigned internals, and a fresh sleek look, the HexOhm v3.0 30A Box Mod by Craving Vapor has been upgraded from 3D printed materials to injection molded ultem which houses the solid brass spring-loaded battery contacts and hidden magnets in the door. The anodized Hexohm is powered by dual 18650 batteries, has its own proprietary board that is rated for up to 30 amps, and is capable of 180W. Some additional features added include: low voltage cutoff for battery protection, a 10 second cutoff timer, and a master on/off switch.
Specifications:
- Custom milled aluminum enclsoure
- Maximum wattage output: 180W
- Requires dual 18650 batteries
- Proprietary 510 that sits 1 sheet of paper above box to prevent atomizer scratches
- Proprietary 30A board
- Master on/off button
- Reverse polarity
- Low voltage cut off (3.0V)
- Max voltage: 6.0V
- 10 second fire limit
- Solid brass battery contacts
- Injection molded battery sled
- Voltage output range of 3.3V-6.0V
Lost Vape Paranormal DNA75C TC Box Mod
$199.99
Lost Vape introduces the Paranormal DNA75C Box Mod. The Paranormal DNA75C is powered by dual 18650 batteries and is integrated with Evolv DNA75C chipset. Designed with a colorful 0.96" OLED display, the Paranormal features an accented leather door, carbon fiber inlay, interchangeable rosewood inlay, and turtle shell decoration ring. With the Evolv chipset, the Paranormal maintains an 85% efficiency rating with a maximum output of 75W with full temperature control support. It also allows users to customize their screen display with its theme designer software and is firmware upgradeable.
Specifications:
- Utilizes dual 18650 batteries
- Wattage range: 1W-75W
- Voltage range: 0.6V-9V
- Minimum Kanthal resistance: 0.25ohm
- Minimum temperature resistance: 0.15ohm
- Temperature range: 200F-600F
- Temperature control support: Ni200, Ti, SS
- Powered by Evolv DNA75C chipset
- Full-color TFT display screen
- Theme designer software
- Customizable user interface
- Escribe software
- Firmware upgradeable
- 85% output efficiency
- Cell balancer
- Cell-by-cell monitoring
- On-board programmable multicolor LED
- Artificial turtle shell decoration ring
- Integrated 1A on-board balanced charging port
- Slight-out bottom battery sled for easy battery replacement
- Spring-loaded 510 connection
- One pair of rosewood inlay and one pair of carbon fiber inlays included
- Die cast Zinc Alloy construction
- Foam padding under leather wrap to give a soft touch to the leather
- Vacuum vapor plating with extra UV protection
Lost Vape Drone BF Squonker DNA250
$199.99
The evolution of the squonker is upon us.
The Lost Vape Drone BF Bottom Feeder Squonker DNA250 is a new mod from Lost Vape’s masterful design team. Powered by Evolv Technologies’ DNA250 chip! Each order includes one Lost Vape Drone BF, squonk bottle, a micro USB cable and user manual.
This mod is sold without any RDA. Bring your own bottom feeder! The elegantly sculpted device requires your final touch in terms of the atomizer you prefer for squonking. Evolv Technologies latest DNA250 scaled-down chip set offers you the piece of mind you expect from the world-class chip set maker. Safety features include step down voltage, overheat and reverse polarity protection, balanced charging via mini USB, A fully customizable readout and much, much more.
Lost Vape Drone BF Squonker features include:
- Engineered and constructed by Lost Vape
- Evolv Technologies DNA250 chipset with U.S. one year warranty
- Magnetic battery cover
- Solid stainless steel button cover with zinc alloy chassis
- Requires dual 18650 cells (sold separately)
- Reads resistance down to 0.08 ohms in TC mode
- Reads resistance down to 0.1 for Kanthal
- Up to 166 watts and up to 6 volts of power
- All the safety features you’d expect from Lost Vape and Evolv
- 2 Amp balanced charging via micro USB port
- Spring-loaded 510 connection, squonk ready
- Solid stainless steel 510 cap and threading
Boxer V2.0 188W TC by Hugo Vapor
Sold Out
Boxer V2.0 by Hugo Vapor features with ergonomic patented design, advanced self-designed chipset 188W maximum output wattage, supporting temperature control mode (Ni200/Ti/SS316L) and wattage mode (Kanthal wire). It will bring more power and better vaping experience for cloud chasers.
Parameters
Size: 90 x 40 x 35mm
Material: Zinc Alloy + Stainless Steel
Variable Wattage: 1.0W - 188.0W
Output range Voltage: 0.5V - 8.4V
Maximum current: 30A
Range battery voltage: 6.0V - 8.4V
Temperature Control range: 100 - 300C / 200 - 600F
Resistance Range: 0.06 ohm - 3.0 ohm
Powered by 2 x 18650 batteries (not included)
It comes with
- 1 x Boxer V2.0 188W
- 1 x USB Cable
- 1 x Manual
- 1 x Warranty Card
Simple packing. Customary Packing from the factory, the packing is subject to change without notice.
Wismec Reuleaux RXmini Resin 80W mod
$79.99
Wismec Reuleaux RXmini Resin 80W mod is a temperature control mod that is powered by built-in 2100mah battery. It can support 80W maxmium output and features large OLED screen to display parameters information. And the mod has compact size and good portability. Equipped with switchable VW, Bypass, TC-Ni, TC-Ti, TC-SS and TCR mode, RXmini will provide you with different vaping experiences. This version is new version comes with resin style design, the mod more light and special.
| Size |
44.5*35.5*58.0mm |
|---|---|
| Output Mode | VW/Bypass/TC-Ni/TC-Ti/TC-SS/TCR Mode |
| Battery Capacity | 2100mah built-in capacity |
| Resistance Range |
0.05-1.5ohm for TC modes 0.1-3.5ohm for VW/Bypass mode |
| Temperature Range | 100-315°C/200-600°F (TC modes) |
| Maximum Charging Current | 1A |
| Maximum Output Current | 25A |
| Thread Type | 510 spring loaded thread |
| Package Contents |
1 x Reuleaux RXmini box mod |
- Details:
- 1. Mini size body
- 2. 80W High Power Output
- 3. Powred by 2100mah built-in capacity
- 4. OLED screen
- 5. Upgradeable Firmware with Preheat Function
- 6. Changeable Leather Sticker
- 7. Various Mode for Enjoyment
- 8. Dual Circuit Protection
- Short
Minivolt compact 40w by Council of Vapor
Sold Out $54.99
The MiniVolt by Council of Vapor has landed at The City! This 40w box mod is easily one of the smallest box mods on the market right now. But don't let its size fool you, the MiniVolt packs a punch!
Features:
1300 mAh built in Lithium Ion battery.
Minimum 0.2 ohm resistance.
Real Carbon Fiber Grip.
Rubberized paint to minimize slipping.
Soft, Standard, and Power modes.
Charge cable included.
ARMS RACE LMC BOX 200W MOD by Limitless
$109.99
The Arms Race Limitless Box Mod is the newest edition to the LMC product line. The Arms Race Limitless Box Mod is a unique 200 watt variable voltage device. This is a dual 18650 box mod, with a magazine style clip to insert your batteries. To access the battery magazine, simply push up on the magazine, slide the clip, and pull down. The Arms Race Limitless Box Mod has a rugged design that is sturdy, yet affordable. This comes with a new custom chip that can fire down to .1 ohms, that is very user friendly, and simple to navigate. The top of the Arms Race Limitless Box Mod fits most 25mm atomizers, with a built in side airflow access port. If you are looking for a new box mod, or want to stand out from all the other, pick up the Arms Race Limitless Box Mod!
Limitless Arms Race Features & Specs:
200 Watt custom chip
25mm maximum atomizer with vent holes
Rugged, sturdy design
Variable voltage
Dual 18650 series setup
Magazine style battery clip
Firmware upgradable
Temperature control
Stealth mode – Flip screen option
Firm grip in the hard
For Limitless Arms Race instructions please go to the link – http://limitlessmodco.com/limitless-arms-race-instructions/
Smok Alien 220W TC Mod
$72.99
The Alien 220w Box Mod by SmokTech. With a max 220w power output, large OLED display and temperature control this tiny yet powerful device will meet all of your vaping needs.
Features and Specs:
Size: 85x44x30mm
Power Range: 6W-220W
Standby Current:<300uA
Voltage Range:0.35V-8V
Resistance Range: 0.1Ω-3Ω (VW) / 0.06Ω-3Ω (TC)
Temperature Range: 200℉--600℉/100℃--315℃
Combined design of function buttons
220W power & intelligent VW/TC Modes
Clearly OLED screen combines with entirely new operation interface.
Dual 18650 battery (batteries not included)
Micro-USB port
Smok GX350 350 W TC
Sold Out
Product Introduction
The SMOK GX350 Box MOD has the maximum output power(350W) in the global with a so much compact size. The max output power can up to 350W when powered by 4 x 18650 batteries. And the Micro-USB port supports firmware upgrade but not for charge. Available in 4 colors.
Parameters
Size: 58x40.4x84.5mm
Max Output Power: 350W (Within 4x 18650 )
Battery: 4x 18650 battery cells (not included)
It comes with
- 1 x GX 350 Mod
- 1 x User Manual
Simple packing. Customary packing from the factory, the packing is subject to change without notice.
- No 18650 batteries is included. You shall purchase them separately.
- 510 thread.
- Attention: Micro-USB port supports firmware upgrade but not for charge.
Smallest size with strongest power
350W Power and replaceable 4x 18650 cells
Upgradeable firmware
Smok Marshal 320W TC Mod
$84.99
Marshal 320W TC Box Mod by Smoktech Description:
Marshal Mod is the newest by Smok, which features creative function button, 320W maximum output, OLED screen. All that brings you the better vaping experience. Innovation keeps changing the vaping experience!
Smok Marshal 320W TC Box Mod Features and Specification:
Creative function button
Maximum Wattage Output 300W
OLED screen
510 Connection
Size: 88.5x61.5x29.6mm
Resistance Range: 0.1Ω-3Ω (VW) / 0.06Ω-2Ω (TC)
Temperature Range: 200℉--600℉/100℃--315℃
Smok Marshal 320W Package Contents:
1 x Marshal Mod
1 x USB Cable
1 x User Manual
Wismec Reuleaux RX300
$84.99
The Wismec Reuleaux RX300 is the next generation flagship
Product Features:
-
1 to 300W Output
- 0.1 to 3.5 ohm Atomizer Resistance Range
- 50A Maximum Output Current
- Firmware Upgradeable
- Preheat Capability
- Custom Logo
- Temperature Control Suite
- Ni200 Nickel Support
- Titanium Support
- Stainless Steel Support
- Three Memory TCR
- Fine Tuned Temperature Controlled Output
- 200 to 600 degree Fahrenheit Range
- 0.05 to 1.5 ohm Atomizer Resistance Range
- Next Generation 0.96 inch OLED Screen
- Vertical Orientation
- Six Row, Two Column Display
- Output Mode
- Output Power
- Output Temperature
- Atomizer Resistance
- Output Amperage
- Individual Battery Life Indicators
- Provides Accurate Readouts for Each Battery
- Stealth Mode
- 180 Degree Rotation
- Quad High Amperage 18650 Powered
- Flip Open and Lock Design
- 24K Gold Plated Terminals
- Bottom Positioned Door
- Quad High Amperage 18650 Powered
- True 300W Output
- Incredible Range
- All Batteries Sold Separately
- Zinc Alloy Base Chassis
- Leather or Carbon Fiber Trims
- Real and Luxury Materials Used
- Leather or Carbon Fiber Trims
- Three Button Control Face
- Classic RX Arrangement
- Advanced Cell Balancing Trickle Charge System
- Ensures Equal and Efficient Charging to All Cells
- 1.5A Avatar Quick Charge Compatible
- Reverse Charging Adapter Compatible
- Screws into 510
- Converts to Powerbank
- Sold Separately
- Stainless Steel 510 Threading
- 24K Gold Plated Spring Loaded Connection
Product Dimensions:
- 42mm by 58mm by 81.7mm
Product Includes:
- One Wismec RX300 Box Mod
- One Micro USB Cable
- QC Compatible
- User Manual and Warning Card
Product Recommendations:
- In order to use temperature control output, coils must be built using non-resistant wire.
Vaporesso Tarot Pro TC Box Mod
$94.99
Vaporesso Tarot Pro Box Mod
The Tarot Pro is the latest mod update from Vaporesso, with an output of 160W and offering automated settings for the most common Temperature Control modes. The Vaporesso Tarot Pro gives you the option to switch the panels with different colors to cater it to your own sense of style.
No matter your coil choices the Tarot Pro comes with an all new OMNI Board as well as an updatable and fully customizable firmware, featuring a variety of modes for temperature control and standard usage alike. This mod offers an advanced temperature control mode called CCT, customized curve of temperature, which is compatible with Ni, SS, Ti wire coils, allowing you to customize your temperature like never before. Similarly, the CCW function allows to precisely customize the ramp up in variable wattage mode. The Smart VW mode will automatically recommend the optimal output power setting for each resistance value when an atomizer is installed. TCR settings are also available if you are using coils built with a different type of wire than the ones managed by the device out of the box (Ni, Ti, and SS). This mod also provides you with the option to turn your device into a mechanical mod with a bypass feature.
Features:
- Dimensions: 93mm x 57mm x 23mm
- Dual High Amp 18650 Batteries - Not Included
- Wattage Output Range: 5-200W
- Voltage Output Range: 0-8.5V
- Temperature Control Range: 280-600F
- Min Atomizer Resistance: 0.05ohm
- Lightweight Zinc and Aluminum Alloy Construction
- Gorgeous Carbon Fiber Finish - Various Designs
- Vaporesso OMNI Board Chipset
- Support Nickel, Titanium, and Stainless Steel Heating Elements
- Temperature Coefficient of Resistance Adjustments (TCR)
- Customized Curvature of Temperature (CCT)
- Customized Curvature of Wattage (CCW)
- Intuitive 0.91" OLED Display
- Highly Responsive Adjustment and Firing Mechanisms
- Magnetized Battery Cover
- Spring-Loaded 510 Connection
Includes:
- 1 x Tarot Pro 160W Mod
- 1 x Micro USB Cable
- 1 x Instruction Manual
Reuleaux RX2/3 Box Mod by Jay Bo Designs
$89.99
Wismec Reuleaux RX2/3 Mod
The Wismec Reuleaux RX2/3 Box Mod by Jay Bo Designs follows the original design of the RX200 series and adds the unique ability to have triple battery configuration (sold separately). The RX 2/3 can fire up to 200 watts in a triple battery configuration. The RX2/3 features a much larger and clear OLED display screen. The user friendly OLED display screen also now features a switchable battery indicator which allows you to choose from a percentage or a battery life bar indicator. Temperature Coefficient of Resistance (TCR) mode is also now available for use as well. Designed by Jay Bo, the RX2/3 utilizes the Reuleaux design with the triangular shaped chassis, creating a svelte form factor that integrates three 18650 batteries in series. The lockable battery back cover allows you to switch to a dual or triple battery configuration with ease. The RX2/3 features the same recessed control face as the Reuleaux, providing a sleek and organized face while improving ergonomic feel and handling.
Designed in conjunction with Wismec and Joyetech, the chipset features an equally powerful 200W maximum output, with full temperature control that is compatible with Ni200 Nickel, Titanium, and Stainless Steel heating materials. This chipset is also upgradeable via firmware upgrades, giving it the ceiling for future improvements in output technology. Building upon the smash hit predecessor, the Wismec Reuleaux RX2/3 Box Mod by Jay Bo Designs maintains the revolutionary design and chassis of the original while implementing an equally powerful chipset, creating a device that cuts no corners while being offered at an astounding price point.
Features and Specs:
-Dimensions: 3-1/2″ x 2″ x 1-1/2″ (Triple Battery Configuration)
-Designed by Jay Bo
-Triple Battery Configuration
-Stainless Steel 510 Threads
-Spring Loaded Contact Pin
-Nickel, Titanium, Stainless Steel 316, TCR Temperature Control Modes/Wattage Mode
-Variable Wattage: 1.0 – 200.0 Watts (Triple Battery Configuration)
-Resistance Range for TC: 0.05 – 1.5 ohm
-Resistance Range for VW: 0.1 – 3.5 ohm
-Temperature Adjustment Range: 100-315°C / 200-600°F
-Requires 3 High Amp 18650 batteries (Sold Separately)
-Micro USB Port
-Upgradeable Firmware
-Larger and Improved OLED Screen
-Switchable Battery Indicator
-Lockable Battery Back Cover
-Multiple Ventilation holes
-Optimized Heat Dissipation Design
-Reverse Polarity Battery Protection
Lost Vape Skar DNA75
$159.99
The Lost Vape Skar DNA 75 carries on the tradition of extremely high grade manufacturing coupled with beautiful aesthetic design, utilizing Lost Vape's current design language to the fullest while packing in single 18650 or 26650 battery compatibility. Slotting in as one of the most compact devices in Lost Vape's current generation, the Skar features a two tone Zinc Alloy construction coupled with an exotic material inlay. The control face features the modern Lost Vape design, with an oversized firing button and two large adjustment buttons. The Skar is equipped with Evolv's DNA 75, featuring an incredibly capable, precise, and customizable output, with a standard output range of 1 to 75W. Onboard support for Ni200 Nickel, Titanium, Stainless Steel, and additional heating elements through Escribe with a temperature output range of 200 to 600 degrees Fahrenheit. Despite the Skar's small and ergonomic size, both 18650 and 26650 batteries are able to be loaded within the device, and is made convenient due to the included clip in 18650 adapter for secure fitment. The 510 connection is machined out of high grade stainless steel while the base chassis is milled out of zinc alloy, while the nickel plated brass 510 connection ensures high level conductivity. A true statement piece that combines Lost Vape's reputation for high level design and manufacturing with Evolv's top tier single battery board, the Skar is a class leading platform that is a fantastic flagship, everyday device.
Product Features:
DNA 75 Chipset
Official Evolv Chipset
1 to 75W Output
30A Maximum Continuous Output
Escribe Compatible
Temperature Control Suite
Ni200 Nickel Support
Titanium Support
Stainless Steel Support
Additional Settings Configured Through Escribe
200 to 600 Degrees Fahrenheit
Two Tone Zinc Alloy Construction
High Grade Material Inlay
Single 18650 or 26650 Compatible
Lock In 18650 Battery Adapter
Gold Plated Spring Loaded Contact
Batteries Sold Separately
Three Button Control Face
Oversized Firing and Adjustment Buttons
Large Adjustment Buttons
0.91 Inch OLED Display Screen
Displays Essential Data Neatly
Adjustable via Escribe
Escribe Companion Software
Configure and Modify the operation of the DNA 75
Escribe Download Link
Escribe Interactive Training Course
Micro USB Port
1A Charging
Firmware and Software Upgrade
Stainless Steel 510 Thread Point
Nickel Plated Brass 510 Contact
Product Dimensions:
90mm by 45mm by 30mm
Product Includes:
One Skar DNA 75 Box Mod
User Manual
Micro USB Cable
VO TECH DAGGER 75W MOD
$84.99
TEMPERATURE CONTROL
The Dagger box mod is an innovative product geared toward new and veteran vapers. Traditional temperature control devices make the user responsible for setting the temperature. The Dagger ensures the ultimate vaping experience with our unique feature Auto Control Mode. The highly advanced PCB within the unit detects the boiling point of each e-liquid and delivers the optimal temperature every time.
PRECISION QUALITY
Boasting a feature rich design The Dagger box mod delivers a truly incredible experience all around the board. This unit not only offers durable construction, but is lightweight as well. The box mod offers an ergonomic button layout all while still having an aesthetically pleasing design.
SPECIFICATIONS
5-80 Watts Power Mode Temperature Control
Nickel, Titanium, 316 Stainless Celsius 100C-315C
Fahrenheit 200F-600F 18650 Battery (not included)
Spring loaded 510 Connector RoHS Compliant
Micro USB 0 5A Charging
CUSTOMIZE YOUR DAGGER WITH PLATES
Yihi SXMini Q Class 200W Box Mod
$249.99
Introducing the first 200W device from YiHi using the SX450J chip. Known for their precise chipsets and quality materials, the Q Class mod is constructed of premium materials to provide a durable and high class device. The Q Class will support a wide variety of temperature control wires such as nickel, titanium, and stainless steel to go above and beyond for max precision. The beautiful OLED screen gives users to customize their own logos and menu names to fit the personality of the user. To power the massive 200W output, the Q Class requires (2) 18650 batteries that are held in place by a replaceable battery cover. More information coming soon!
Product Features
● Alloy Zinc & Stainless Steel Construction
● Powered by the SX450J Chip
● Max 200W Output
● Temperature Control
○ Supports Ni200, Titanium, & Stainless Steel Wires
● Supports All Atomizers With SX Pure Technology
● Requires (2) 18650 Batteries (Batteries Sold Separately)
● Replaceable Battery Cover
● 510 Threaded
● OLED Screen
● Ergonomic Shape
● Onboard Balance Charging (2A)
● Customizable Logo & Menu Name
● Intelligent Taste Control System SX-Q
Package Contents
1 x SX Mini Q Class
HOhm Slice 26650 101W TC
$89.99
"NO LIMITATIONS. It's time to put all other mods to rest...the Hohm SLICE does it all"
SPECIFICATIONS
Chip: FSK1, TC-XT Series (T24SMX v3.2)
Battery: 26650-powered
Temp Control: Ni, SS, Ti, NiCr, K, W, & Ceramic Infused (YES, temp control EVERYTHING. No limits here)
Wattage Output; 10W -101W (all modes)
Voltage Output; FSK1 Intellichip, automation
Temperature Range: 200°F - 700°F
93°C - 372°C
Ohm Resistance Range: Flatline - 0.000001Ω - 3Ω
Temp/Watt Increments：0.1 (10-49.9: WATTS MODE)
1.0(50-101: WATTS MODE)
1.0°C (TEMP MODE)
10.0°F (TEMP MODE)
Asmodus Minikin 2 180 Watt
$124.99
The Minikin is back the all new Minikin 2! The Minikin 2 is powered by a GX-180-HT chip which incorporates the same battery power saving capabilities as its predecessors but features a new wattage cap of 180 watts and touch screen support!
The Minikin 2 utilizes newly updated firmware which displays the following information on its LED screen: Individual battery charge, resistance of the atomizers, volts being used to fire at desired wattage, a puff counter, the duration of the fire, and which mode you are in.
The Minikin 2 features a redesigned body that was designed to be exceptionally comfortable to hold. The asMODus logo has been re-positioned to the back of the device and the USB port has been moved the front of the device as the battery door has been remodeled to add magnetic closure. 15 vent holes have been added to the base of the device which allows for maximized heat dissipation.
Using the device
Unlocking the touch screen is done by simply sliding your finger down the screen. Touching the wattage will allow you to change the wattage using the "+" and "-" buttons that appear on the screen. Pressing the fire button will set the wattage and take you back to the main screen. The menu of the device is accessed by pressing the firing mode when the screen is unlocked. Within the menu you can check the resistance, select a mode, and enter the set up.
Checking resistance: Once in the main menu, clicking the "Res" button enters you into the resistance menu. On this screen you will see "Set Res" on the top and on the bottom you will see a "CHECK" button. By pressing the "CHECK" button , it will give you a resistance and "YES" and "NO" buttons will appear. Pressing "YES" will take you back to the main menu with your resistance set. Pressing "NO" will cause "+" and "-" buttons to appear which allow you to manually change your resistance. NOTE: The manual changing of resistance only applies when using a temperature control mode.
Picking a mode: In the main menu, the 2nd option found is called "Mode". By pressing "Mode" you will enter a mode selection menu that allows you to choose which mode to fire the device in. You will see "PWR" which is your standard variable wattage mode and within that mode you will see two different options: "W" Power which is wattage mode, and a new mode called "Curve". "Curve" is a unique firing mode within traditional power mode that manually imitates the abilities of temperature control by setting 5 different wattage over time presets. For example you can set the device to fire at 80W for .5 seconds then 90W for 0.5 seconds then 75W for 0.5 seconds (for up to 5 different presets). Doing this will run through your presets in a cycle for an extremely fine tuned vaping experience. Wattage in "Curve" can be adjusted in 0.1 watt increments and seconds can be adjusted in .1 second increments. The other options found in the mode selection screen are "Coil" which is used to select which type of wire you are firing against (supports Ni200, SS316, SS317, and Ti), and then "TCR" and "TFR" modes.
Using set up: The last option in the main menu is called "Set Up". In the "Set Up" menu you will see three different pictures. The first one (which looks like a light) controls the brightness of the screen. The screen can be adjusted on a scale of 1 - 10 based on user preference. The 2nd option (which looks like a piece of paper) is used to set a puff limit. This sets a maximum number of puffs that can be taken if you are trying to limit and monitor the amount that you vape. If you try to fire the device and have exceeded your maximum puffs, a warning symbol along with the text of "PUFF LIMIT" will display on the screen and the device will not fire. Setting the limit to 0000 will not set a maximum number of puffs but will still record the amount of puffs taken. The last option (which looks like a garage can) wipes your puffs so can have a fresh gauge of how much the device is being used.
Technical Specifications:
Requires two 18650 sized batteries
Touch screen type: Capacitive screen
Wattage range: 5.0 - 180.0W
Wattage range (TC Mode): 5.0 - 120.0W
Atomizer ohm range: 0.1 - 2.5 ohm
Max output voltage: 7.5V
Peek output current: 45A
Temperature control range: 212° - 572°F / 100°C - 300°C
Charging parameters: DC 5V/1A
Upgradeable system
Wismec Nobacco APYRON 75W TC Box Mod
$54.99 $74.99
Nobacco brings the revolution to the world of vaping in terms of design, aesthetics and technology.
APYRON is the first device that was designed and manufactured by NOBACCO DESIGN CENTER. It signifies and leads the next generation of electronic cigarettes and marks the technological progress that has been achieved in order to increase the satisfaction that comes along with vaping
Size: 22*42*82mm
Thread Type: 510 thread
Cell type: High-rate 2000 mAh built in battery
USB pass through charging
Game mode
Output Mode: TC-Ni/TC-Ti/TC-SS/TCR M1-M2-M3/VW/Bypass/Clock Mode
Output Wattage: 1-75w
Resistance Range: 0.05-1.0ohm for TC-Ni/TC-Ti/TC-SS/ TCR M1-M2-M3 mode
0.1-3.5ohm for VW/ Bypass/Clock mode
Temperature Range: 100-315°C/ 200-600°F(TC-Ni/TC-Ti/TC-SS/ TCR M1-M2-M3 mode)
• Its stainless steel buttons not only give rise to a unique aesthetic result, but also ensure its durability.
• Its 510-connector with the self-adjusting pole and steel threads guarantee the smooth operation of the device with a wide range of atomizers and the durability of its threads.
• Its Micro USB charging port with Pass Through system allows the user to continue vaping while charging the device.
• Its 0.96″ OLED display ensures the sharpness and brightness of the display under any lighting conditions.
• The device’s 75 Watts are adequate to power the 99% of the market’s atomizers.
• The Power Mode allows the user to set the power output anywhere between 1-75 watt, and thus, enjoy a consistent and rich vapor production throughout the battery’s life.
• In the Bypass Mode, the device’s electronic board is bypassed providing to the atomizer all the battery’s available voltage.
• In the TCR Mode (M1, M2, M3), the user can adjust the Temperature Coefficient of Resistance (TCR), thus, a wide range of atomizers can be used without any restriction with regards to the resistance material.
• The APYRON can be upgraded via the USB port.
asMODus Ohmsmium 80W TC Box Mod
$89.99
The Ohmsmium, powered by the GX80 Chip, is a new box mod that is built with a max of 80 watts in power mode, accurate temperature control, a vibrant solid color design, as well as an ergonomic chassis. This box mod is made from zinc alloy and stainless steel and features a solid and durable body construction. It is a small mod that features a curved, radiant design to make it comfortable to hold. The Ohmsmium is finished with a unique, vivid coloration to make each unit stand out and will be available in a wide range of colors (colors soon to be announced).
At the top of the device, the threaded connection is spring-loaded to easily attach any 510 compatible atomizer. The pin is gold plated to ensure the best conductivity. On the control face, you’ll find a large stainless steel fire button and adjustment buttons as well as a USB port. There’s also a bright OLED screen which displays all the mod’s current information including resistance, voltage, battery percentage, wattage/temperature, mode and puff time.
The Ohmsmium is built with a GX80 chip which grants temperature control functionality from 200°F to 600°F. The GX80 features five different working modes: Bypass, power and three variable temperature control modes. Temperature Control mode can be used with Titanium (Ti), Nickel (Ni200) and Stainless steel (SS316) coil based wires. The Ohmsmium can fire atomizers with resistances as low as 0.08Ω in temperature mode to accommodate a wide variety of builds.
The Ohmsmium utilizes a single, external 18650 battery (not included) and features onboard charging via the USB port with pass-through charging capabilities which allows the user to vape and charge at the same time. Batteries are located behind a threaded battery cover to allow for easy access and features 4 holes for battery ventilation. Many safety features are included in the unit’s design including short circuit protection, low voltage warning as well as a high temperature warning.
Product Specifications:
Dimensions: 25mm x 81.5mm x 43mm or 0.98″ x 3.21″ x 1.69″
Weight: 248g or 8.75oz (Heavy Duty)
Utilizes the GX80 Chip
Constructed from Zinc alloy and stainless steel
Curved, ergonomic design makes for an exceptionally comfortable mod
Compact chassis allows for portability
Amazingly vibrant color designs for a unique look
Gold plated 510 connector for maximized conductivity with spring-loaded functionality for easily switching between atomizers
Power output: 1.0 - 80.0 watts
Temperature range: 200°F to 600°F or 100°C to 300°C
Modes: Bypass, Power, Temperature control (Ti/Ni/SS316)
Resistance range (Power & TC modes): 0.08Ω-3.0Ω
Requires a single 18650 sized battery (not included)
Threaded battery cover with ventilation holes
Onboard charging as well as Pass-through charging via micro USB
Lost Vape Therion 18650 DNA75 Mod
Sold Out
If you appreciate workmanship, The Lost Vape Therion is up your alley.
The Lost Vape Therion DNA75 is truly a refined device and has a lot to offer. The mod is a cutting-edge work of art, with supple leather and wood detail on the outside, powered by Evolv’s newest board on the inside. The Therion operates on two 18650 cells. You can charge the device via the mini USB port or using an external charger. Using two battery cells the mod reaches 75 watts, while its temperature control features with TCR availability extends your functionality.
In addition, the DNA75 chipset from Evolv Technologies is the newest circuit board from the company you trust for internals. The Therion utilizes Escribe to facilitate changes to the TCR or for customizing the user interface. Finally, the screen has been enhanced for better visibility. In addition to whiter LEDs, there are three lines of display, with the lowest line showing you the type of material for the coil, I.E. KA for Kanthal. The previous incarnation offered voltage, which has been done away with.
Each mod includes a gift box with mini USB cord for charging and eScribe access.
Lost Vape Therion features include:
- Magnetic battery door, with limited edition Italian leather covered panel
- Made by Lost Vape
- Authentic with new DNA75 by Evolv Technologies
- Dual 18650 mod (batteries sold separately)
- Walnut wood trim
- Solid billet frame
- Therion emblazoned by 510 area
- eScribe PC application available here
- Mini USB chargeable
- Temp control and power mode
Lost Vape Triade Triple 18650 DNA 200 Mod
$229.99
The Lost Vape Triade brings high-end finishes to a much-loved design in the vape community.
The Lost Vape Triade is powered by an Evolv technologies DNA200 board and is shaped very comfortably for the palm of your hand. With the help of a US modder, Lost Vape designed the Triade to be attractive, ergonomic, and powerful. Borrowing from the design of other triple 18650 battery mods, such as the the RX200 or the Reuleaux DNA200, Lost Vape’s take on it is slimmer, lighter, and made with genuine leather panels.
The Triade includes a sleek carrying case with an old Celtic symbol for triade – which in old Gaelic translates to “triple.” Inside the carrying case you’ll find a USB charging cable, user manual, and the beautiful Triade mod in your choice of leather back cover color: red, brown, or yellow.
Lost Vape Triade features include:
- Powered by Evolv DNA200 board (firmware upgradeable through Evolv’s Escribe software)
- Triple 18650 Mod (Batteries not included – please use 3 “married” 18650 cells)
- Dimensions: 85mm x 50mm x 40mm
- Power output: 1-200 watts
- Temperature limit: 200°F – 600°F
- Preset profiles included: Nickel (Ni200), Titanium (Ti), and Stainless Steel (SS)
- Die cast Zinc Alloy body
- Genuine leather wrap on the magnetic back panel
- High definition 0.91″ OLED screen
- Solid Stainless Steel 510 housing with nickel plated brass pin
- Spring loaded 510 connection
- Integrated 1Amp Micro USB on board balanced charging port
- USB charging cable included (highly recommended to charge batteries in an external charger)
- Reverse Polarity Protection
- Venting Slots
- 6 month limited manufacturer warranty from Lost Vape
- 1 year DNA200 board warranty from Evolv: Evolv product Limited Warranty
Please note: As the back panels are manufactured from genuine leather, the hide may contain some natural scars and/or imperfections. No two mods are exactly identical, and small variations between grains and color are natural to the tanning and manufacturing process. Grain patterns and colors may vary from hide to hide and within the hide itself. To extend the life of your back panel, we suggest using a leather conditioner occasionally to lessen the appearance of scratches and protect your mod.
Asmodus Minikin Boost 155W Box Mod
$89.99 $119.99
asMODus is proud to announce the resurrection of the Minikin with the vastly improved Minikin V1.5! The Minikin 1.5 features a power output of 150 watts (increased from the previous 120 watts) as well as structural and functional improvements. The Minikin V1.5 can handle a vast array of wire types; more than you probably even thought were available! Here's a list of acceptable wire types in the Minikin V1.5:
- Alloy 120: Precision Resistance Alloy 120 has been used in thermometer bulbs and other applications that require high temperature coefficient of resistance. It has a temperature coefficient similar to nickel and twice the resistivity. The slope of the temperature resistance curve is almost straight from -70° to 600° C (-94° to 1,112° F).
- Alloy 52 : Alloy 52 is a controlled expansion alloy, consisting of 51% Nickel, balance Iron
- Gold
- Invar36: also known as FeNi36, is a nickel-iron, low-expansion alloy containing 36% nickel. It has a low coefficient of expansion from cryogenic temperatures to about 260℃.
- Kanthal A1 APM (Non-TC, please see note below): Kanthal APM is an advanced powder-metallurgical, dispersion-strengthened, ferritic iron-chromium-aluminium alloy (FeCrAl alloy) for use at temperatures up to 1425°C (2600°F). The alloy is characterized by exceptionally good form stability and oxidation resistance. Kanthal APM has low tendency to ageing and low resistance change. It has excellent surface oxide properties, which gives good protection in corrosive atmospheres as well as in atmospheres with high carbon potential, and no scaling. (Note this is not the same as Regular Kanthal)
- Kanthal AA EAF {Non-TC, please see note below): Or Kanthal AF is a ferritic iron-chromium-aluminium alloy (FeCrAl alloy) for use at temperatures up to 1300°C (2370°F). The alloy is characterized by excellent oxidation resistance and very good form stability resulting in long element life.(Note this is not the same as Regular Kanthal)
- Kanthal D (Non-TC, please see note below): Kanthal D is a ferritic iron-chromium-aluminium alloy (FeCrAl alloy) for use at temperatures up to 1300°C (2370°F). The alloy is characterized by high resistivity and good oxidation resistance. (Note this is not the same as Regular Kanthal)
- Ni200: Nickel 200 alloy is a commercially pure nickel that exhibits good corrosion resistance. it is ferromagnetic and has relatively low electrical resistivity.
- NiFe30: An iron–nickel alloy or nickel–iron alloy, abbreviated FeNi or NiFe, is a group of alloys that mostly consist of the elements nickel (Ni) and iron (Fe).
- Nilo36: a binary nickel-iron alloy containing 36% nickel.
- Nichrome
- Nickel DH: Nickel DH is a nickel alloy (Ni alloy) with a minimum nickel content of 99.2 % suitable for use at temperatures up to 600°C (1100°F).
- Pernif36: also known as Alloy 36 is a 36% nickel-iron alloy that exhibits a near zero rate of thermal expansion which is roughly one tenth the expansion rate of carbon steel at temperatures from around -100°C up to 200°C.
- SS 304: Alloy 304 a T-300 series stainless steel austenitic, which has a minimum of 18% chromium and 8% nickel. Type 304 has a maximum carbon of 0.07%.
- SS 316: Alloy 316 is molybdenum-bearing austenitic stainless steel. The higher nickel and molybdenum content in this grade allows it to demonstrate better overall corrosion resistant properties than 304, especially with regard to pitting and crevice corrosion in chloride environments.
- SS 316L: Alloy 316L is the lower carbon version of 316 and is immune from sensitization
- SS 317L: Alloy 317L is a molybdenum containing, low carbon austenitic stainless steel with increased additions of chromium, nickel, and molybdenum for better corrosion resistance and increased resistance to chemical attack for sulfurous, acetic, formic, citric, and tartaric acids.
- SS 430: Grade 430 is a ferritic, straight chromium, non-hardenable grade, combining good corrosion resistance and formability characteristics with useful mechanical properties.
- Silver
- Titanium: also know as (Ti)
*Kanthal wire Found in Pre-made coils unless specifically stated to be one of these heating elements will not properly Emit Temperature Regulation. you must have a Kanthal element as stated above as they have different properties.
*Please make sure you are using the Listed Heating Elements above for accurate Temperature Regulation. These modes are only compatible with the specified heating element property only.
The Minikin V1.5 has structural improvements (to the body itself) that create a firmer, higher quality body that creates a heavy-duty feel as well as providing extra solidity and stability to the mod. The Minikin V1.5 retains the full bodied removeable battery door, which has truly has become quite the crowd favorite, but partnered with the Minikin V1.5's upgraded body structure, the door fits tight as a glove yet retains its ability to swap out batteries with maximized simplicity. A mini USB port has been implemented to grant the capability to charge via USB if preferred by the user.
The Minikin 1.5 also features improvements in its functionality with an updated screen that displays the individual charge of each battery that is being used by the mod. This update shows the user if a battery is being used more than another. This can happen if batteries have not been "married" (purchased together and used together solely) but this new technology, you can quickly view and resolve the situation. The Minikin V1.5 also allows the user to manually adjust the resistance that is read from the atomizes with ease. The V1.5 also features newly implemented TCR and TFR options to further enhance its performance. With TCR (Temperature Coefficient of Resistance) you are able to manually adjust the resistance that is read with your particular coil or build so you will always hit at your desired resistance depending on your build. With TFR (Temperature Factor of Resistivity) mode the Minikin V1.5 permits the user to use hybrid builds that have a mix of wire types safely and can be adjusted based on user preference. Both TCR and TFR functions have 5 memory storage modes each to quickly switch between different settings with a few clicks through the menu.
The Minikin v1.5 retains all the same hyper power saving capabilities as its predecessor which boost your two battery mod to feel like it has a three battery capacity with the same adorable size. Batteries of at least 30 amps are required to make these power saving and power boosting functions work at their full potential.
WISMEC x JayBo Reuleaux RX200S
$79.99 $94.99
Thread Type: 510 spring loaded thread
Cell type: High-rate 18650 cell (discharging current should be above 25A)
Output Mode: VW/TC-Ni/TC-Ti/TC-SS/TCR Mode
Output Wattage: 1-200W
Resistance Range: 0.05-1.5ohm for TC modes
Resistance Range: 0.1-3.5ohm for VW mode
Temperature Range: 100-315°C/ 200-600°F (TC modes)
Moreover, it can also be charged via USB cable.
1*USB Cable
1*User Manual
1*Warning Card
Vaporflask Stout 100w Temp Control (Single 26650)
$126.00
The Vaporflask Stout is a single 26650 (user-serviceable) device equipped with a 100W maximum power output. The Stout also features variable temperature technology supporting Nickel, Titanium and Stainless Steel coils. Additional features include upgradeable firmware, easy to operate user interface and innovative hinged battery door for effortless battery changes.
- Maximum Output Power of 100W
- Temperature Control System with Upgrade Function
- Optional TC-Ni/TC-Ti/TC-SS/VW/Bypass Mode
- Replaceable Cell and Rotatable Bottom Cover
- Milled Stainless Steel Adjustment and Fire Buttons
- Stainless Steel Threaded, Spring-Loaded 510 Connector
- Replaceable Cell and Rotatable Bottom Cover
Specifications
- Size: 46.5*30.0*85.3mm
- Thread Type: 510 thread
- Cell type: High-rate 26650 cell (discharging current should be above 35A )
- 18650 Conversion Tube
- Output Mode: TC-Ni/TC-Ti/TC-SS/VW/Bypass Mode
- Output Wattage: 1-100w
- Resistance Range: 0.05-1.0ohm for TC-Ni/TC-Ti/TC-SS mode
- 0.1-3.5ohm for VW/ Bypass mode
- Temperature Range: 100-315°C/ 200-600°F (TC-Ni/TC-Ti/TC-SS mode)
- Colors: black, white
Vaporflask Lite 75w Temp Control (Single 18650)
$111.00
The Vaporflask Lite is a single 18650 (user-serviceable) device equipped with a 75W maximum power output. The Lite also features variable temperature technology supporting Nickel, Titanium and Stainless Steel coils. Additional features include upgradeable firmware, easy to operate user interface and innovative hinged battery door for effortless battery changes.
- Maximum Output Power of 75W
- Temperature Control System with Upgrade Function
- Optional TC-Ni/TC-Ti/TC-SS/VW/Bypass Mode
- Replaceable Cell and Rotatable Bottom Cover
- Milled Stainless Steel Adjustment and Fire Buttons
- Stainless Steel Threaded, Spring-Loaded 510 Connector
Specifications
- Size: 23.4*42.2*85.2mm
- Thread Type: 510 thread
- Cell type: High-rate 18650 cell (discharging current should be above 25A )
- Output Mode: TC-Ni/TC-Ti/TC-SS/VW/Bypass Mode
- Output Wattage: 1-75w
- Resistance Range: 0.05-1.0ohm for TC-Ni/TC-Ti/TC-SS mode
- 0.1-3.5ohm for VW/ Bypass mode
- Temperature Range: 100-315°C/ 200-600°F (TC-Ni/TC-Ti/TC-SS mode)
- Colours: black, white
Vaporflask Classic 150w Temp Control (Dual 18650)
$168.00
The Vaporflask Classic is a dual 18650 (user-serviceable) device equipped with a 150W maximum power output. The Classic also features variable temperature technology supporting Nickel, Titanium and stainless steel coils. Additional features include upgradeable firmware, easy to operate user interface and an interchangeable magnetic battery cover.
- Maximum Output Power of 150W
- Temperature Control System with Upgrade Function
- Optional TC-Ni/TC-Ti/TC-SS/VW Mode
- Stainless Steel Threaded, Spring-Loaded 510 Connector
- 2 replaceable battery cells structure; magnetic back cover; multiple ventilation holes
- Milled Stainless Steel Adjustment and Fire Buttons
Specifications
- Size: 62.0*27.2*92.0mm
- Cell type: 2 High-rate 18650 cell (discharging current should be above 25A )
- Output Mode: TC-Ni/TC-Ti/TC-SS/VW Mode
- Output Wattage: 1-150w
- Resistance Range: 0.05-1.0ohm for TC-Ni/TC-Ti/TC-SS mode
- 0.1-3.5ohm for VW mode
- Temperature Range: 100-315°C/ 200-600°F (TC-Ni/TC-Ti/TC-SS mode)
Joytech Cuboid 150w Temp Control Box Mod
$74.99
It is powered by two replaceable 18650 cells with the new slip-open cover.
Multiple colors, 0.96-inch OLED screen and the new dual-battery bar display make it more practical and attractive catering to your preference.
Upgradeable firmware enables it always up-to-date. Now you can upgrade your Cuboid to 200W via VT Software.
1 * Cuboid (no cell)
1 * USB Cable
1 * Manual
1 * Warranty Card
The maximum output can be reached to 150W, making it powerful and convenient.
We kindly recommend high-rate 18650 cells with rated discharge current≥25A.
With the Onboard Reverse Polarity Protection, it will protect the device from damage in the event of reverse battery installation.
We kindly recommend you using Joyetech BF-SS316 atomizer heads (0.5ohm/1.0ohm).
Cuboid enables you to adjust TCR values for different materials,
thus further improving the accuracy of temperature control and bringing you the great taste.
There are three options (M1, M2, M3) for you to customize the TCR regarding to the material.
And here's the TCR Value Range for your reference:
Applied with 510 stainless steel thread and wide border fitting for large capacity atomizers.
The micro USB port is on the top of the left side. Connect it with a micro USB cable to charge or upgrade your device.
WISMEC x JayBo Reuleaux RX200
Sold Out $104.99
Thread type: 510 thread
Cell type: Three 18650 cells(discharging current should be above 25A )
Output mode: TC-Ni/TC-Ti/TC-SS/VW mode
Output wattage: 1-200w
Temperature range: 100-300°C/200-600°F(TC mode)
Resistance range: 0.05-1.0ohm for TC-Ni/TC-Ti/TC-SS mode
0.1-3.5ohm for VW mode
0.69 inch OLED screen
The RX200 with 3 battery cells can maintain the 200W high power output continuously and steadily.
Moreover, it can also be charged via USB cable.
1*USB Cable
WISMEC x JayBo Reuleaux DNA 200 (Evolv Chip)
$209.99
Powered by DNA 200 Technology
Optimized Heat Dissipation Design
Unique Structure & Innovative Appearance
Stainless Steel Thread & Spring Connector
Three Replaceable Cells & Magnetic Back Cover.
Product IntroductionReuleaux, powered by DNA 200, becomes the new highlight of Wismec. The unique exterior design and advanced temperature control technology make it stand out from others. In addition to the magnetic back cover which matches well with the body, the high power output of 200w will make you own a wonderful vaping experience.
ReuleauxOrigin of the name “Reuleaux”: the first e-cigarette with 3 replaceable cells; the unique structure consisting of three separate shells; DNA 200 technology, famous designer Jay Bo and Wismec brand combined.
Reuleaux
Parameter
Size: 50.0mm*40.0mm*84.0mm
Thread type: 510 thread
Cell type: Three 18650 cells
Output mode: TC/VW mode
Output wattage: 1-200w
Temperature range: 100-300°C/200-600°F(TC mode)
Color: Silver
0.91 inch OLED screen
ReuleauxMain FeaturesUnique Exterior Design: Its irregular and unique appearance benefits from the structure of 3 replaceable battery cells, which makes it feel great in your hand. (Recommend: high-rate 18650 cells, such as Sony US18650VTC4)
Reuleaux
Reverse Polarity System for Batteries: If installed improperly, the plastic hoop will prevent the battery touching the opposite contact head.
Reuleaux
Temperature Protection powered by DNA 200: Reuleaux requires a heating coil made from Nickel 200 or other materials with a well-defined temperature coefficient of resistance, rather than Nickel Chromium or Kanthal alloys when using in TC mode. Appropriate temperature settings will reduce the breakdown of flavoring and base liquid components.
Reuleaux
The DNA 200 also allows you to save and select between eight customizable profiles, and Reuleaux will be always current with upgradeable firmware.
200 Watt Variable Power: The maximum output power can reach 200w, which will bring you a wonderful vaping experience.
Reuleaux
Stainless Steel Thread and Spring Connector:: The stainless thread makes the device much wear-resisting and the spring connector greatly increases its adaptability.
Reuleaux
ChargingYou can take out the lithium-batteries from the device and then charge the cells.
Moreover, it can also be charged via USB cable.
Reuleaux
Reuleaux
Standard Configuration:
1*Reuleaux Body
1*Back Cover
1*USB Cable
Hamilton Wentworth's Premier Vape Shop Since 2014
ABOUT US
SHOP MENU
Information
The Vapor Bar168 King Street West, Ontario, CA, L9H 1V4
(905) 581-8273
News & Updates
Sign up to get the latest on sales, new releases and more …
Hamilton Wentworth's Premier Vape Shop Since 2014. Hamilton News Readers Choice Winners for "Stop Smoking Assistance" and "#2 Best New Business of 2015". Looking to switch from cigarettes? Stop by our shop and sample for free with over 180 flavours of e-juice in stock. Let us help you at The Vapor Bar Hamilton Vape Shop
© 2015 THE VAPOR BAR INC. | ALL RIGHT RESERVED
